1 How can I find a Wheelskins dealer?
Call Wheelskins at 1 800 755-2128, 8:30AM to 4:00PM Pacific Time, or E-mail firstname.lastname@example.org with your telephone area code. You can also enter the key word Wheelskins into your internet search engine to find a website that sells Wheelskins products.
2 How do I know what size Wheelskins Steering Wheel Cover I need for my vehicle?
Just click on sizes to find your vehicle. If your vehicle is not listed, or if it requires a Special Order size, click on measure for measuring instructions. When measuring around the grip, measure at the top of the wheel and around the highest point of the slight finger bumps that are on the back side of most wheels. Don’t measure at the thumb rests that are on many modern wheels at the 10 o’clock and 2 o’clock positions. The leather is elastic enough to stretch over the thumb rests. Special Order sizes are generally necessary for older or antique vehicles, or aftermarket steering wheels.
3 Do you make Steering Wheel Covers to fit my Heavy Duty Truck?
Yes, we make covers in 18”, 20” and 22” sizes for heavy duty trucks such as Peterbilt, Freightliner, Kenworth, etc. Please click on measure for instructions on how to measure your steering wheel.
4 Do you make Steering Wheel Covers to fit my classic car, my golf car, my child’s pedal car, my boat, my motorhome, etc?
Yes, we make Steering Wheel Covers to fit any wheel. Please click on measure for instructions on how to measure your steering wheel.
5 How are Wheelskins Steering Wheel Covers installed?
Each cover comes complete with a nylon lacing cord, a needle, and illustrated detailed installation instructions. The holes are pre-punched with a patented lacing hole reinforcement to prevent tearing during installation. The time required is approximately 60 minutes.
6 My Steering Wheel has wide spokes. How do I deal with the spokes during installation?
The illustrated Installation Instructions provided with your Wheelskins will show you how to lace around the spokes, or to use dummy stitches at the spokes if they are wider than about 1 ½ inches where they connect to the wheel.
7 How can I get a replacement lacing cord and needle?
Call 1 800 755-2128, 8:30AM to 4:00PM Pacific Time, or E-mail email@example.com and we will send one to you free of charge. Please remember to give us the color of your Wheelskin. The lacing cords come in Black, Red, Tan, Grey and White.
8 What leather colors are available?
Click on colors to see the leather colors that we offer. Please remember that the color representations will vary from monitor to monitor. We will be happy to send you actual leather color samples so you can make the proper choice for your vehicle. Click on the Color Sample Request on any Order Page, or call 1 800 755-2128, 8:30 AM to 4:00 PM Pacific Time, or e-mail us at info@Wheelskins.com with the color samples you wish to see, and we will send them to you right away.
9 The color or size of the Steering Wheel Cover that I purchased is wrong. Can I exchange It for the right one?
Yes, simply return it to us with a note stating your name, address and telephone number and the color or size that you want. Please be clear with what you want us to do so that we can take care of your request right away. Send the return to:
13688a York Road
North Royalton Oh 44133
10 How do I clean and maintain my Steering Wheel Cover?
Your Wheelskin is made of leather that is specifically tanned and finished for this product. We recommend that you gently use only water and a soft sponge or paper towel to remove any surface soil buildup. Avoid all purpose cleaners and protectants that will remove the special finishes and coatings on the leather. Also, most leather cleaners are made for the extremely hard finishes found on upholstery leathers , and these cleaners are unsuitable for the softer Wheelskins leathers. In addition, many perfumes, colognes, after shave lotions, and hand sanitizers contain alcohol and other chemicals that can harm the leather. We recommend that your hands be free of these substances before you drive.
11 How can I get another copy of the installation instructions?